When you wish to brighten up an outfit, accessory, luggage piece or even hats you can easily sew on badges to get the fresh look easily dogbadge.com/labradors/. Badges or patches when placed strategically can immediately replace the look of a garment or accessory and take it from boring to spunky within just a few minutes. In case you have children and they keep earning badges of merit you would like to sew them on. However, as intimidating as it might sound, sewing on badges isn’t very difficult when you know how you can get it done.
To start off this process of sewing on a badge, start with placing the badge on the place in which you want it to be. Now secure the badge well with a few pins so it stays into position and doesn’t shift while you’re sewing it on. Now if you are putting the patch on a garment, you have to fix the patch and then try the garment on to make certain that the patch or the badge looks most suitable in the place. If the patch requires a little readjustment you can do it at this stage easily.
Now thread the needle making sure that the thread that you’re using isn’t very long. Keep the thread at a length of approximately 18inches for simple maneuvering. If the thread is simply too long then you might get bothered by knots. Once you have the thread ready make a knot at the end of the thread. You can actually thread a needle by hand by holding the non knotted end between your forefinger and thumb after which passing it in the eye of your needle. You could also take the aid of a needle threader if you find threading a needle in such a manner difficult.
Pass the needle through the badge and the fabric being sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from which you began stitching keeping this distance from the last stitch all of the time. Continue stitching round the entire perimeter of the badge until you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by way of a single stitch. Pull the thread strongly to secure the knot after which cut off any excess thread that is left. Lastly remove the excess safety pins that you were using to secure the patch in position.
You may as well sew on badges with the assistance of a sewing machine if you don’t want to do the same by hand. Pick a thread that matched the colour of your patch and then tread your machine. You may also pick out a contrasting color with regards to the look that you would like to present your badge. Once this is done you need to start sewing you badge. Makes use of the surface of the badge for your kick off point and sew all along the edge of your badge making use of the regular stitch mode ending at your starting position. Once done, cut the excess thread that connects the badge to the machine and your garment is ready to be used together with the badge.